Viewing 15 posts - 1 through 15 (of 20 total)
  • Author
    Posts
  • #2956
    yedaoxiang@sina.com
    Participant

    I scan the sample data (including fruits and pills) obtained was always only the temperature,this why?Is there a problem with my scio?

    #2959
    Ayelet
    Keymaster

    Hi Ye,

     

    The temperature attribute values are automatically added to SCiO lab.

    In order to estimate other values, corresponding attributes should be manually defined and the known values should be populated.

     

    We highly recommend reading the ‘DevKit Workflow Manual’ and ‘Getting Started’ documents thoroughly as well as our online guide (by pressing on the ‘Help’ button).

     

    Ayelet,

    The Consumer Physics Team

     

    #2967
    yedaoxiang@sina.com
    Participant

    thanks for your help. and  I’will try again.

    #2971
    yedaoxiang@sina.com
    Participant

    This is what kind of near infrared spectrometer? fiber optical spectrometer or grating spectrometer ?

    #2973
    Ayelet
    Keymaster

    Hi,

     

    SCiO uses proprietary technology.

    Since the device hardware is part of our intellectual property, we typically do not disclose it.

     

    Ayelet,

    The Consumer Physics Team

    #2976
    yedaoxiang@sina.com
    Participant

    How can I see the spectrum processing algorithm by SCIO Lab Mobile?

    #2985
    Ayelet
    Keymaster

    You can choose each one of the pre-processing methods under ‘Spectrum’ tab.

     

    We highly recommend reading the ‘DevKit Workflow Manual’ and ‘Getting Started’ documents thoroughly as well as our online guide (by pressing on the ‘Help’ button).

     

    Ayelet

    #2987
    yedaoxiang@sina.com
    Participant

    Thanks for your patience to answer!I will read  the ‘DevKit Workflow Manual’ and ‘Getting Started’ documents in detail.

    #3003
    yedaoxiang@sina.com
    Participant

    Why I can’t see the raw reflectance spectrum on my scio lab?

    Attachments:
    You must be logged in to view attached files.
    #3016
    Ayelet
    Keymaster

    Hi,

     

    When viewing the scans of a data collection, the preprocessing method options allow you to view your raw reflectance spectrum with different algorithms applied. These can help you identify outliers, inaccurate scans and reveal possible relationships in your data.

     

    Note that this option will be available on SCiO’s next generation device.

     

    Meanwhile, if you would like to get the raw reflectance spectrum with no algorithm applied, this can be done by downloading the spectrum as a CSV file.

    If you are interested, please contact us at support@consumerphysics.com.

     

    Ayelet,

    The Consumer Physics Team

    • This reply was modified 8 years ago by Ayelet.
    #3025
    yedaoxiang@sina.com
    Participant

    In this SCIO Lab How do I get the original reflectance spectra ?

    #3032
    yedaoxiang@sina.com
    Participant

    SCIO can detect pesticide residues of fruits and vegetables ?

    #3042
    rejsharp
    Participant

    Hi yedaoxiang – the lower limit of detection is stated to be around 1%, so residues which are present in ppm or ppb will not be found.

    #3048
    yedaoxiang@sina.com
    Participant

    Hi rejsharp – In this SCIO Lab How do I get the original reflectance spectra ?

    Attachments:
    You must be logged in to view attached files.
    #3056
    rejsharp
    Participant

    Only Researcher backers can get the raw reflectance data.
    It is not helpful to most people.

Viewing 15 posts - 1 through 15 (of 20 total)
  • You must be logged in to reply to this topic.